“I believe the unbelievable, I receive the impossible, because it’s doable.”

Jesse Duplantis
Covered hot tub on a Florida patio with the cabinet access panel open

Hot Tub Repair

No heat, no jets or a new error code on the panel? Get matched with an independent local pro who repairs hot tubs and spas.

Free matching with independent local pool pros across Florida.

Two kinds of hot tub, two kinds of repair

Hot tub repair starts with one question: is your hot tub a portable, self-contained unit sitting on a patio or deck, or a spa built into your pool? A portable hot tub has its own heater, pumps, blower and electronic control pack inside the cabinet. An attached spa shares the pool's pump, filter and heater, and uses valves to move water between them.

Knowing which one you have helps route your request to a pro with the right experience. Include the brand and model if the label is visible on the cabinet or control panel.

Safe checks to try first

A few simple fixes solve a surprising number of hot tub problems. Turn off power at the breaker before opening any panel.

  • Reset the GFCI. Hot tubs are on GFCI protection that can trip after storms. If it trips again right away, stop and call a pro.
  • Clean or replace the filter. A clogged filter causes low flow, which causes many heating and flow errors.
  • Check the water level. It should cover the skimmer opening so the pumps do not draw air.
  • Clear an airlock. After a refill, air trapped in the pump can stop circulation. The owner's manual usually explains how to bleed it.
  • Write down the code. Note any error code or blinking light exactly as shown.
Hot tub top-side control panel displaying an error message

Common hot tub repairs

Hot tub problems and the parts pros commonly check
ProblemParts a pro commonly checks
Will not heatHeater element, high-limit and temperature sensors, flow or pressure switch, control pack
Jets weak or not workingJet pump, impeller, diverter valves, clogged jets or filter
No power or trips the breakerGFCI breaker, wiring, heater element short, pump motor
Water on the ground or under the cabinetPump seals, unions, heater housing, jet bodies, cracked fittings
Control panel dead or unresponsiveTop-side panel, ribbon cable, control board
Loud humming or grindingPump bearings, blower, circulation pump

Dirty, foamy or cloudy water is usually a cleaning job, not a repair. See spa and hot tub cleaning.

What happens after you request a hot tub repair

  1. Send the details

    Type of hot tub, brand, error code and what it is doing.

  2. A local pro gets in touch

    An independent pro who repairs hot tubs in your area contacts you.

  3. Diagnosis

    The pro tests the electrical and water flow systems to find the failed part.

  4. Quote and repair

    You get the pro's price. If you approve, they order parts and schedule the repair.

What affects hot tub repair cost

  • The failed component. Sensors and switches are smaller jobs than heaters, pumps or control packs.
  • Brand and parts. Some manufacturers use proprietary parts that take longer to get.
  • Access. Leaks inside a foam-filled cabinet can take time to reach.
  • Age and condition. On an older tub, a pro may help you weigh several repairs against the tub's overall condition.

Before work begins, confirm that the pro you hire holds the Florida license your job requires. Hot tub repairs often involve high-voltage electrical work.

Hot tub repair questions

How do I find hot tub repair near me?

Send a request with your city, whether it is a standalone hot tub or a spa attached to your pool, the brand if you know it, and what it is doing. Dominion Pool Pros passes it to an independent local pro who repairs hot tubs in your area.

How much does hot tub repair cost?

It depends on the part and the tub. A tripped GFCI or a dirty filter may need no parts at all. A heater element, circulation pump, control pack or a leak inside the cabinet is a bigger job. Brand, parts availability and access to the equipment also affect the price. Ask for a written quote.

Why is my hot tub not heating?

Common causes are a dirty filter restricting flow, a tripped high-limit, an airlock after refilling, a failed heater element or a faulty sensor. Clean the filter and check for an error code first, then request a pro if it still will not heat.

What does an error code on my hot tub mean?

Codes vary by manufacturer, but most point to flow, temperature or sensor problems. Write down the exact code and include it in your request so the pro can bring the right parts.

Is a spa attached to my pool repaired differently from a portable hot tub?

Yes. An attached spa shares the pool pump, heater and plumbing, so problems are often solved with pump, heater or plumbing work. A portable hot tub has its own built-in heater, pumps and control pack inside the cabinet. Mention which one you have.

Request hot tub repair in these Florida areas

Requests are matched with independent pros in six Florida metro areas. Availability depends on local pro coverage.

Get your hot tub back

Tell us the type of hot tub, the error code and your city. We will pass your request to an independent local pro.

Dominion Pool Pros is a free referral service. We connect Florida homeowners with independent local pool professionals and do not perform any pool or spa work ourselves.