Pool Pump Repair and Replacement
When the pump stops, the whole pool stops. Get matched with an independent local pro who can find out why and fix it, or help you choose a replacement.
Free matching with independent local pool pros across Florida.
What pool pump repair covers
The pump is the heart of your pool. It pulls water through the skimmer and main drain, pushes it through the filter and any heater or salt cell, and sends it back through the return jets. If it stops or weakens, chlorine stops circulating, the filter stops cleaning and algae can take hold within days in Florida heat.
Pool pump repair covers the motor, the wet end (the housing, impeller, diffuser and seals), the lid and basket, and the wiring and controls that feed it. When a pump cannot be saved, the same pros handle replacement, including matching the new pump to your plumbing and filter.
What is your pump doing?
Match the symptom to the likely cause. This helps you describe the problem in your request, and it helps the pro arrive with the right parts. It is a starting point, not a diagnosis.
| Symptom | Common causes | What a pro usually checks |
|---|---|---|
| Hums but will not spin | Failed start capacitor, seized bearings, jammed impeller | Capacitor test, free-spin test, impeller inspection |
| Loud screeching or grinding | Worn motor bearings | Bearing replacement or motor replacement |
| Water dripping under the pump | Worn shaft seal, cracked housing, loose unions | Seal kit, housing and fittings |
| Air bubbles, weak flow, will not prime | Low water, clogged basket, bad lid o-ring, suction-side air leak | Lid, o-rings, suction plumbing and valves |
| Trips the breaker | Motor winding fault, wiring problem, water in the motor | Electrical tests on motor and supply |
| Shuts off after running a while | Overheating motor, blocked vents, low voltage | Ventilation, voltage and motor condition |
Safety first: if the pump trips the breaker, smells of burning or has water near the motor, turn it off at the breaker and leave the electrical checks to a pro.
Repair or replace?
Most pros will lay out both paths when a pump fails. These are the factors that usually decide it.
-
Repair often makes sense when
- One part has failed, such as a capacitor, seal, o-ring or impeller
- The motor and housing are otherwise in good condition
- Parts for your model are easy to get
- The pump is sized correctly for your pool and filter
-
Replacement is worth discussing when
- The motor itself has burned out or the housing is cracked
- The same pump keeps needing repairs
- Parts are discontinued or hard to find
- An older single-speed pump runs long hours every day and you want lower running costs with a variable-speed pump
What to expect after you send a request
Describe the problem
Tell us what the pump is doing, when it started and, if you know it, the brand. Pros commonly work on Pentair, Hayward and Jandy pumps.
A local pro reaches out
Your request goes to an independent pro who covers your area and handles pump work.
Diagnosis and quote
The pro checks the pump, explains what failed and gives you their own price for repair or replacement.
You decide
If you go ahead, the pro schedules the work and gets water moving again.
What affects pool pump repair cost
We do not publish prices, because only the pro who sees your pump can quote it. These are the factors that move the number:
- What failed. A lid o-ring and a full motor are very different jobs.
- Pump type and brand. Single-speed, dual-speed and variable-speed pumps use different parts.
- Parts availability. Common parts are quicker to source than discontinued ones.
- Plumbing and wiring. A replacement that needs new plumbing or electrical changes takes more work.
- Urgency. A pool turning green adds pressure to fix it fast. Ask the pro how they schedule.
Ask for a written quote that separates parts and labor. Before work begins, confirm that the pro you hire holds the Florida license your job requires.
How to help your pump last
- Empty the pump and skimmer baskets often, especially after storms.
- Keep the water level at the middle of the skimmer opening so the pump never runs dry.
- Keep the filter clean so the pump is not pushing against high pressure. See pool filter cleaning.
- Keep leaves and mulch away from the motor vents so it can cool.
- Fix small drips early. A leaking seal can let water reach the motor bearings.
Pool pump repair questions
How do I find pool pump repair near me?
Send a request with your city and a short description of what the pump is doing. Dominion Pool Pros passes it to an independent pool pro who covers your area in Orlando, Fort Lauderdale, Tampa, Jacksonville, Fort Myers or Miami. The pro contacts you directly.
How much does pool pump repair cost?
It depends on what failed. A seal, a capacitor or a clogged impeller is a very different job from a burned-out motor or a full pump replacement. Price also depends on the pump model, whether parts are in stock and whether plumbing or wiring needs changes. Ask the pro for a written quote that separates parts and labor.
Should I repair or replace my pool pump?
Repair usually makes sense when one part has failed on a pump that is otherwise in good shape. Replacement is worth discussing when the motor itself has failed, when the housing is cracked, when parts are hard to find or when an older single-speed pump is running many hours a day. Many pros will talk through both options. See variable-speed pump installation.
Why does my pool pump hum but not start?
A hum with no spin often points to a failed start capacitor, a seized motor bearing or debris jamming the impeller. Turn the pump off at the breaker and do not keep restarting it, since a stalled motor can overheat. A pro can test the capacitor and motor safely.
How can I tell if my pool pump is losing prime?
Signs include air bubbles in the pump basket, weak flow from the return jets, gurgling sounds and a basket that never fills with water. Common causes are a low water level, a clogged skimmer or basket, a cracked lid or a worn lid o-ring, or an air leak on the suction side.
Related services
- Variable-Speed Pump InstallationConnect with a local pro to replace a single-speed pump with a variable-speed model and program it for your pool.
- Pool Filter Repair and ReplacementConnect with a local pro to fix cracked tanks, torn grids and failing cartridges, or replace a filter that no longer keeps up.
- Pool Plumbing and Valve RepairConnect with a local pro for cracked pipes, stuck or leaking valves, air in the lines and weak return flow.
- Pool Automation and Smart ControlsConnect with a local pro to repair a control panel or add automation that runs pumps, heat, lights and valves from one place.
Request pool pump repair in these Florida areas
Requests are matched with independent pros in six Florida metro areas. Availability depends on local pro coverage.
Is your pump down?
Tell us what it is doing and where you are. We will pass your request to an independent local pro who handles pump repair and replacement.
Dominion Pool Pros is a free referral service. We connect Florida homeowners with independent local pool professionals and do not perform any pool or spa work ourselves.